Ako i malo znaš engleski skontat ćeš
Test the drivers first before run the software. Follow these steps:
1. Find one 616
2. Connect the phone to the cable - it must be switched on
3. Install the drivers
4. When the installation for all drivers finished:
4.1. Remove the battery
4.2. Connect the phone to USB cable
4.3. The led will shine first then the display as well.
4.4. Few seconds later the display must be blue and to have this text:
A:
C:
blue(color not text)
blue(color not text)
blue(color not text)
.
.
.
blue(color not text)
616v: the test mode display on the e616v appears on the
small outer display and not the inside screen.
5. If you can't see this you must start again with drivers installation.
Without these drivers the program can't work.
If you have not this result(4.4.) you can't use the program
JOŠ MALO I OVI ĆE SVI PILIĆARI DA POCRKAJU